|
|
|
|
|
|
|
 | Available up to 600 mm in: - different alloys and carbides. - ground, lapped or polished -thickness tolerances up to +/-0,0005 mm and +/-0.001 on parallelism | | | SPACERS |  | 
|  | | | | The spacers’s tolerances are important as those of the roll shear knives. Precise equipment grant a very small error on assembly. For easy set-up, we produce splited spacers. Surface’s treatments against oxidation are available. Ultra-light spacers in polyamide are in our standard production. | | | | | | | BONDED STRIPPER RINGS |  | - with hardened steel core - with Perbunan, Buna N or polyurethane - different colours - different Shore hardness of the rubber - different heat resistance | | | | | | | SEPARATOR DISCS AND SPACERS |  | Discs: - hardened separator discs - ground or polished in base of the application SPACERS: - In steel or polyamide - available in three colors -special coatings for sensitive or soft materials | | | | QUILL SETS |  |
The perfect assembly and balancing of these groups provides:
-saving time of mounting -high cutting quality | | | | KNIFE COLLARS BLOCK |  | For fast strip width adjustments, we offer complete knife collars with upper and lower knife assemblies, including individual fine adjustment to set the required clearance. Suitable in particular for processing wide strips as well as side trimming operations. | | | | Software |  | For fast strip width adjustments, we offer complete knife collars with upper and lower knife assemblies, including individual fine adjustment to set the required clearance. Suitable in particular for processing wide strips as well as side trimming operations.
Upon entering all tooling parameters, CamB_5 shows the optimized tooling assembly in various possible printout versions, such as a chart or a graphical printout.
In the event of extremely high precision slit width tolerances, the tools can also be assembled by balancing out the tools according to their tolerance location. This compensates for any cumulative errors caused by the thickness tolerances. Deviations caused by thickness tolerances are eliminated. This guarantees reproducible strip accuracies.
Cost savings and assembly advantages are gained and there is no need for any trial slitting. The program also offers the possibility of automatic pre-settings based on different slitting parameters. The integrated statistical quality control management program enables the user to retrieve detailed information and documentation from processed strip results. |  | | | | POLISHER |  | Our automatic face-polishing machine is capable of polishing the faces of roll shear knives in an efficient and safe way. The removal of debris build-up on the knife faces (exp. Aluminum) results in improved strip edge quality and prolonged service life of the knives.
Resulting from an eccentric rotating motion of the knife, a full-surface polishing of the side faces is guaranteed at all times. The process takes only a few seconds. | | | |
|
|
|
| |
